Cuff Dump Valve

Non adjustable (not spring loaded). One way flow Dump Valve without any adjustment. Controlled by Check valve. No On/Off function. Designed to fit SI TECH Valve ports. (Valve port is not included).

SI TECH does not recommend this valve as the only valve on drysuits. Dump Valves should be used in combination with a SI TECH Exhaust Valve.

This Dump Valve is designed to be fitted in a Valve port. The hole in the drysuit fabric must be a minimum of 50 mm (1,97″) in diameter. The Baseplate must seal against the Valve port.

TECHNICAL SPECIFICATION
Diameter: 48,5 mm (with knobs)
Height: 29 mm (total without Valve port)
Attachment threads: M33 x 1,5
Pressure resistance at 10 normal liters/minute: 0,6 mbar