20lb Travel BP/W Package

The Highland Travel Wing makes a nice addition to a diver’s modular plate and wing system. Due to its streamlined profile and light weight, it lends itself well to traveling or to those dives when you just feel like being a minimalist.

• Includes 25 in (63.5 cm) Miflex QD Carbon hose

• 16 in (41 cm) corrugated hose with K-style inflator

• Low-profile, rapid-exhaust dump on the upper left

• Low-profile dump on the lower inside left

• Integrated carrying handle on the top center

• Removable tank anti-roll assembly

• Vent at the top center allows air to quickly escape between the inner and outer bag

• Spiral hose retainer loop

• Outer bag made from 1000D nylon with PU coating

• Inner bladder made from 210D nylon

• 4 slots allow direct attachment to cylinder with nylon cam bands

• 2 sets of 11 in (280 mm) centered grommets

We get it. Standard plates are too heavy and soft plates are too flimsy. Try a minimalistic aluminum travel plate. It will provide all the support you need and minimize those nasty baggage fees.

• 5052 aluminum alloy with tungsten anodized finish

• Weight: 1 lb 1 oz (495 g)

• All edges are softened to protect the harness

• The 3 holes at the top offer variable height adjustment for air cell and cylinder mounting. In addition, a corresponding lower oval slot allows for lower band bolts that may be misaligned

• Slots at the bottom are for use with 1 in (2.5 cm) or 2 in (5 cm) wide crotch strap

• 3/8 in (9.5 mm) accessory mounting holes along the sides and bottom

• Slide-bars included (p/n HL816)

• Hardware not included

Travel plates are often used in the tropics where minimal thickness exposure suits are worn. As such, a back pad is used so that the diver doesn’t have to feel the hard plate on their back. The Highland Back Pad is custom made specifically for the ultralightweight Aluminum Travel Plate. It is neutrally buoyant, has a large utility pocket and includes the attachment hardware.

• Attaches to the Highland Aluminum Travel Plate (p/n HL801-TP) using 4 plastic book screws (included)

• An integrated large utility pocket is ideal for carrying lift devices or other accessories

• The comfort comes from the use of 3D open cell mesh foam. Open cell foam does not add inherent buoyancy and it drains and dries quickly

• Backside is made of 1000D nylon

• Dimensions: 11 x 15 in (28 x 63.5 cm)

The Tec/Rec Harness is a simple continuous weave design that can easily be customized. The 2” (50 mm) nylon web is specifically sourced for harness and crotch strap applications.

• One continuous 12ft. (3.7m) piece of webbing with center grommet

• Adjustable crotch strap with front and back D-rings

• Stainless steel waist buckle

• 2 shoulder D-ring attachment points

• 2 waist D-ring attachment points

Add comfort and protect your exposure suit, by covering your web harness shoulder straps with these Highland shoulder pads.

• Made from quality 5 mm neoprene

• Simply slide over 2 in (50 mm) webbing

• Glued and stitched

• Seams reinforced with bar tack stitching

Separating buckles allow for easy detachment, no need to slide off top of cylinder.

• Traditional 3-slotted cam buckle made from marine grade 316 stainless steel
• Enlarged protective webbing lays behind the buckle to protect tank scratching
• Backside of webbing has integrated anchor pad, which eliminates tank slippage
• Designed to fit 6.9 in (175 mm) to 8.0 in (203 mm) diameter cylinders